PDA

Voir la version complète : CTD-Germany CatBack Proto with Bypass



CTD-Germany
16/01/2009, 12h37
hello,

we are pround to present our new stainless steel exhaust system with bypass. here are some pictures...

tino

http://www.notre350z.com/forum/files/thumbs/CTD-Germany/1232105794_ctd_350z_1.jpg (www.notre350z.com/forum/files/uploads/CTD-Germany/1232105794_ctd_350z_1.jpg)
http://www.notre350z.com/forum/files/thumbs/CTD-Germany/1232105806_ctd_350z_2.jpg (www.notre350z.com/forum/files/uploads/CTD-Germany/1232105806_ctd_350z_2.jpg)
http://www.notre350z.com/forum/files/thumbs/CTD-Germany/1232105820_klappe1.jpg (www.notre350z.com/forum/files/uploads/CTD-Germany/1232105820_klappe1.jpg)
http://www.notre350z.com/forum/files/thumbs/CTD-Germany/1232105830_klappe2.jpg (www.notre350z.com/forum/files/uploads/CTD-Germany/1232105830_klappe2.jpg)

el zorro
18/01/2009, 12h04
je retiendrait la soudure en bout de Y intelligent certainement beaucoup moins de probleme de casse au niveaux des soudures peripheriques

Daryl
31/03/2009, 00h40
donc soit ça passe en direct du côté gauche uniquement, soit ça passe dans la marmitte et sort des 2 côtés ?

RomainZ
03/04/2009, 19h24
Je dirais ca aussi Daryl :wink:

CTD-Germany
07/04/2009, 11h09
hello,

if the bypass is open, the exhaust gases go also through the left and right exhaust tip, but more through the left one of course. if the bypass is open the rear muffler is not closed, it is still open. i try to make some videos soon, so you can check it out.

tino