350z Compartiment de coffre - Tonneau Cover (BOOT DIVIDER)

  • Auteur de la discussion Auteur de la discussion 350Z-UK-
  • Date de début Date de début
Bonjour,

I am selling These nissan 350z boot dividers that I make and sell here at my company Custom-CreationZ.

these are made from solid mdf materials and high quality black acoustic carpet which is sound deadening.

The purpose of these boot dividers are to stop items rolling up into the cabin, help reduce road noise and stop people looking into your rear for possessions you may have lying around.

These are a good solid tight fit, that you push under the rear strut, there is no additional modifications or fixings required to the divider or the car, it is simply "plug and play"

I have sold many of these through my website and eBay, but I am now offering these at a special price to Notre350Z members at only 65 EURO FREE SHIPPING!.


Send me a message if you would like to proceed.

regards



















***********
 
Hi ! I suggest you to change the title of your topic to "Diviseur de coffre" or "Compartiment de coffre" ;-)
 
First one sold here to a notre350z member! its in the post on its way.

There is plenty more left if anyone wants one!
 
Hi,

Please, don't see any offense in my comment, but, honnestly, I don't think it worths 65€. As you said, they are handmaid goods and we can imagine it's just a wood board coverd with a little piece of carpet. Am i wrong ? Could you be a little more explicit on your building processes, materials etc... ??

I think that for 65€, we can expect a board covered with leather or something else, customisation, nicknames...

Regards,

Tchemi
 
hello,

Thank you for your questions, these are far from over priced, I sell these on the 350z Uk forums for £60 GBP + £10 postage, which is 85EUROS.
I have sold over 20 on the Uk forums, and nearly 8 on ebay.. all for the same price.

The taking a Original 350z boot divider, which may I add are super rare and sell for around £100 GBP if you can even get hold of one as Nissan have stopped making them years ago.

we use an original as a template, set up a jig in the workshop and we cut two pieces of 6-8mm MDF, we then smoothen all the edges and coat it in a solution that will stop it getting damp.

then we creat the Z out of similar MDF and attach the Z logo to one of the boards.

The carpet we use is actually more expensive than leather or suede or anything else. The carpet we use is high quality SOUND DEADENING acoustic carpet which is used in music studios etc to help keep noise down.

WE cover both sides of the boot divider separately making sure both sides fit and match, one side is slightly bigger as under the strut it is on a slight angle, nothing the eye can see but we are accurate to 0.5mm per the original.

when both sides are carpeted we then have to bond both sides of the boot divider together ensuring that it will not move at all and is then set in a room temperature controlled room and left to set for 48 hours.


It is not simply a bit of wood stuck together, the making process is engineered to fit 100% every time and costs to produce these are high.



at 65 Euros, I am only making a very small profit, it is set at this price as I am trying to break into the European market then then prices will go up to match the UK market. Also please bare in mind I am a business in the UK so have to pay TAXes etc out of my profits, I also run a website for these which cost money. At 65 euros, I am practically giving these away.

Please bare in mind that shipping costs are actually included in the price and shipping alone is 20 Euros.


I can indeed make custom boot dividers is people require, however the price will go up.

The price is very very keep and I have had many happy customers in the UK happy paying nearly 50% more for them.

I would also like to add, these are only hand made as our CNC machine is currently being set up, and a CAD design is being produced, so soon these will be machined when we are fully up and running.

Thank you for your question :)
 
I would also like to add, I do actually make custom dividers, in leather if people wish or whatever design they choose.

all they have to do is contact me with there Ideas and I will do my best to make sure It happens for them to the same high quality as my originals
 
Hi, thank for your detailed reply. I'll translate it for the fellows ;-)

Je traduis donc, pour ceux que ça intéresse.

"Merci pour ta question, ils sont loin d'être surestimé. Je les vends 60£ + 10£ de FDP sur les forums UK, ce qui fait 85€.
J'en ai vendu plus de 20 sur les forums UK et à peu près 8 sur eBay, tous au même prix. Un compartiment de coffre d'origine Nissan est super rare et se vend environ 100£, si jamais t'arrives à en trouver un car Nissan a arrêté de les produire y'a plusieurs années.
On utilise un original comme model, on crée un patron et on coupe 2 pièces de MDF de 6-8mm, ensuite on ponce toutes les arrêtes et on vernis avec une solution imperméabilisante. Ensuite on crée le 'Z' dans le même MDF et on l'attache à un des deux côtés.
La moquette qu'on utilise et en fait bien plus chère que le cuir ou le daim ou quoi que ce soit. C'est une moquette acoustique de haute qualité utilisée dans les studios de musique pour limiter le bruit.
On recouvre les deux côtés séparément en s'assurant que les deux morceaux soient à la bonne taille et tombent juste. Il y a un côté un tout petit peu plus grand car il y a un angle saillant sous la traverse, rien qui ne puisse être vu à l'œil nu et nous sommes précis à 0.5mm par rapport à l'original.
Quand les deux parties sont recouvertes de moquette, on les lies et les laisse sécher 48heures dans une pièce où la température est contrôlée.

Ce n'est pas simplement des morceaux de bois collés, le processus de fabrication fait que 100% des pièces sont bonnes et les coûts de fabrication sont élevés.
A 65€, je fait une toute petite marge, je les mets à ce prix pour essayer de percer en Europe mais ensuite les prix rejoindrons ceux du marché UK. Il faut aussi garder à l'esprit que je suis un professionnel et que je paie donc des taxes, j'ai aussi un site web qui coûte de l'argent. A 65€, je les brades quasiment.
Dis toi que les 20€ de FDP sont compris dans le prix.

Je peux faire des séparateurs personnalisés si certain le souhaitent mais le prix sera plus chère. Le prix est vraiment contenu et j'ai plein de client satisfaits en Angleterre qui payent presque 50% plus chère.
Je voudrais aussi ajouter qu'ils sont fait à la main car notre machine CNC (???) n'est pas encore réglée et un model CAD (???) va être produit, donc il seront bientôt fait avec des machines quand tout sera prêt."


Le monsieur ajoute qu'il peut très bien en faire en cuir ou quoi ou qu'est-ce... Faut juste demander.
 
Thank you, its very much appreciated.

I do have a little trouble with the translation as french is not my strongest, however I get by with google translate :)

I have actually had nothing but compliments for these boot dividers and more so about the low good price for such a quality Item.

regards
 
un peu chero quand meme; j'avais pense faire le mien moi meme; faut juste se faire ch..er a qautre pattes dans l'auto pour faire un gabarit carton.
APpres un bout de planche vernis ou pas ( humidite dans le coffre ??).....Covreing carbone 3m avec pourquoi pas une personnalisation rajoutee en dessous style incrustation sous tissus ou moquete accoustique bas de gamme, ou aiguillettee fine..
.85 € ...
Ya un tuto sur le fofo avec des conseils de Pat me semble t il ...et jusqu'à maintenant, je n'ai tjs pas commence le mien, comme quoi , l'utilite lorsqu'on à un filet de coffre à 5€ de chez Nortoto..
Voila mon avis
@+

PS j'avais pas vu le prix de 65...Mon avis reste le meme
 
Petit retour rapide (il y en aura un autre plus tard après quelques tests) sur ce produit : il est de bonne qualité et le gabarit est niquel, ça passe pil poil dans le coffre.

Pourquoi l'avoir pris? Pour le matériel utilisé, notamment la moquette acoustique car je cherche à diminuer le bruit du train arrière qui remonte très fortement dans le Z (une moquette acoustique sera ajouté à même la tôle par la suite). Car sous la pluie par exemple, c'est vraiment un calvaire sur des grands trajets (surtout quand tu es à 140 en 6ème, tu n'entends pas beaucoup le moteur).

Je vous ferais donc un retour sur la partie acoustique quand j'aurais un peu de temps pour faire des essais (avec et sans) histoire de vous donner mon ressenti. Même chose sur la fixation (il ne tient que grâce au gabarit, pas de patte de fixation), histoire de voir si à la première accélération, le sac à dos ne le fait "sortir" de son emplacement.

Quelques photos prises à l'arrache :

 
humidite dans le coffre ??
la condensation.
Je verrais une version carbone/Kevlar au couleur de la voiture. Il est aussi possible d utiliser un plastique massif avec evt une moquette voiture mais c'est difficile/onéreux à thermophormer et à découper à la CNC.

je trouve tout cela bien sympa :oops:
 
Retour
Haut